Waveware API-64 Alarm Monitoring Manuel d'utilisateur

API- 64, API-64EM, API-64RM, TABLE OF CONTENTS CHAPTER 1INTRODUCTION. 1-1 PURPOSE OF MANUAL. 1-1 CHAPTER 2 DESCRIPTION INTRODUCTION. 2-1 DESCRI

the same message is processed to be sent to ID3. The field is variable from 1 to 30 minutes in 1 minute increments. Use the <PAGE UP>/<PAGE D

programmed correctly and can serve as a hard copy back up of the same. Press the <Escape> key to stop printing. REMEMBER TO USE THE F1 KEY T

(4) Once the system has completed the search process, the "ITEM" field will indicate how many items or separate events are stored in the dat

6. Momentarily power down the API-64RM and then power it back up. 7. Press the <ENTER> key within 5 seconds of powering the unit back up. 8

INTRODUCTION 2-1 This chapter describes the characteristics, capabilities, features and specifications of the Alphanumeric Paging Interface. DESCR

ENCLOSURE... METAL WALL MOUNTING... METAL BRACKETS COUNTER TOP...

The Alphanumeric Paging Interface allows for expansion from 64 inputs to 1024. The number of inputs is expanded by the addition of expansion modules (

The Remote Dial Module requires a single line, DTMF telephone line in order to dial a paging system. The API-64RM can share a telephone line with anot

There is one block of four dip switches on the circuit board inside the unit. Set The Dip Switches for Each Expansion Module Using the Table Below:

MAIN MENU DESCRIPTION The main menu is displayed when the API-64 is powered up, when you exit from any of the other menus or the system times out o

-------------------------SYSTEM SETUP------------------------ STATIONS : INPUT PULSE RS232 BAUD: INPUT STATUS RS232 BIT: PAGE FORMAT: DATE: / / P

open to closed will initiate the "RESET" or return to normal message. If the INPUT PULSE field has been set to Yes, a change in condition fr