
Paging System RF Amplification Equipment
Recommended for Most 25 to 50 watt Applications
UHF RF Amplification (Signal Booster) Kits
The RF Mobile Amplifier Kit Allows you to
Transmit at a Higher Power Level (watts).
The RF Mobile Amplifier Kit is Compatible with most
Low Powered Paging Systems, Including:
o SPS-5 v9S UHF 2 or 5 watt Paging System.
o SPS-5 v9E UHF 2 or 5 watt Paging System.
o SPS-5 v9 UHF 2 or 5 watt Paging System.
o And Many other Paging Systems.
o For More Details: See Amp Brochure at…
http://www.wirelessmessaging.com/Product_Brochures.html
Please Note:
The Paging System and the RF Amp Must be Tuned
together, as a Package. Will Not be Sold Separate.
25 or 50 watt Amp Kit
Includes: The TPL RF Mobile Amplifier,
a 15 Amp Power Supply, 20” UHF
Fiberglass Antenna, 5 Ft. Jumper Coax
and a 25 or 50 Ft. RG-8 Coax Cable and
Ant. Mounting Hardware.
25-watt Amp Kit P/N= 0007-1002
50-watt Amp Kit P/N= 0007-1003
Additional Information of RF TPL Amp Kits
we sell Includes:
o Requires a 2-watt or a 5-watt Input.
o 25 watts Requires approx 1.72 watt Input
from Transmitter.
o 50 watts Requires approx 4 watt Input from
Transmitter.
o Available as UHF (440-470MHz) or by
Special Order VHF (148-174MHz).
o 25 or 50 watt Output Combo Amp, meaning
that One Amp can do either Output, depends
on the Input watts.
o Power Supply Harness Included.
o Wall Mountable.
o For the Antenna Supplied, see Below.
The Amp Kit Antenna Information.
o Used with the 25 and 50 watt Amp Kits.
o Can be used almost anywhere Inside or
Outside the Building.
o Recommend Installing in a Centralized
Location within the Coverage area.
o Recommend Installing in Upright Position,
but can be used Installed Slightly Slanted.
o Comes with All Mounting Hardware.
o Recommend using RG-8 or RG-8U Coax.
Antenna (Part of the Amp Kit)
Includes: Antenna and Mounting
Hardware.
Antenna Kit Specifications:
o Unity Gain Antenna, no Ground Plane.
(No DB-Gain with this Model)
o 18” to 20” Tall Fiberglass.
o 50 ohms Impedance.
o 1.5:1 VSWR.
o Connector Type is N-Series Female.
o Frequency Range is UHF 450-470MHz.
o 200-watt Maximum Power Input.
o
Weighs 1 lb. - without Hardware.
Ask us about Our High Power Paging “Terminals” w/ Power from 25 to 100 watts UHF, Complete and with a 19” Rack Mount Enclosure.
Commentaires sur ces manuels